Nickel Electroplating Kits
Two gallon nickel plating system with solution, anodes, power supply, and setup guidance for larger small-shop work. Sold manufacturer-direct from NickelPlatingPro with technical support on every order.
Shipping is shown at Square checkout.
Processing time and delivery date are not published here. Confirm timing before ordering for a deadline.
Request a bulk or repeat-order quoteBuying several products? Include the product names and quantities in your quote request.
Good to know
Two gallon nickel plating system with solution, anodes, power supply, and setup guidance for larger small-shop work. Sold manufacturer-direct from NickelPlatingPro with technical support on every order.
If you are choosing between a kit, a ready-to-use bath, electroless nickel, or a strike, start with the job: part size, base metal, and whether you already own a tank, anodes, heater, or power supply. Email support before you order if that is unclear.
Who it is for
Restoration shops, repair work, makers, and small plating operations that need manufacturer-direct chemistry with real process support.
In the order
Setup
Degrease, rinse, and use the correct activation for the base metal. Do not skip cleaning; most adhesion problems start there. Some kits require a separate adjustable DC power supply. Check the included items on this page.
How to start
The included product instructions are the controlling procedure.
Unpack the kit and read the included instructions before mixing or heating anything.
Clean, rinse, and activate the part.
Set up the bath and any included anode or leads as directed.
Process a test piece first, then plate the actual part and rinse.
The result
A useful nickel or copper result depends on preparation, bath control, and following the included instructions—not on the bottle alone.
Be realistic
Follow the label and SDS. Confirm unusual alloys or existing coatings with technical support before you process a valuable part.
Shipping
Shipping is shown at Square checkout.
Need it for a job with a hard date? Confirm timing with support before ordering.
Safety
Use the label, instructions, and Safety Data Sheet. Technical support is included if you get stuck.
Request an SDSQuestions
Two gallon nickel plating system with solution, anodes, power supply, and setup guidance for larger small-shop work.
2 gallons nickel plating solution; nickel anodes; 30 volt 10 ampere power supply; setup guidance
Shipping is shown at Square checkout, or quoted by email on larger quantities.
Yes. Email sales@nickelplatingpro.com with the base metal, part size, and the finish you want.
Also useful
Made in USA